UV Light Curing Adhesives

Acrylics

Type: 4480
For structural bonding, coil termination, bonds to steel, aluminum and glass surfaces. Can be used for in cryogenic applications.

Type: 4481
Optically tansparent. Designed for use in fiber optic applications. Refractice Index is 1.48. Also used as clear potting adhesive. Type 4481-L is a low viscosity (150cps). R.I. 1.52

Type: 4482
Rapid structural wire tacing of PCB's. Excellent adhesion to a wide variety of surfaces.

Type: 4195
For SMD attachment. Forms high strength , resilient bonds which elimate critical matching of thermal expansion coefficients between SMD's and PCB material.

Type: 4415
Temporary peelable solder mask.

Type: 4497
Temporary water soluble solder mask.

Medical Grade Acrylic UV Adhesives.

Type: 4M01
Medical Grade USP Class VI designed for use on polycarbonates, acrylics and other thermoplastics where a flexible joint is desired.

Type: 4M11
Medical Grade USP Class VI designed for use on polycarbonates, acrylics and other thermoplastics where a flexible joint is desired.

Type: 4M12
Medical Grade USP Class VI for use on rigid/flexible PVC and polycarbonate.

Type: 4M21
Medical Grade USP Class VI for flexible joints on rigid/flexible PVC and polycarbonate.

Type: 4M31
Medical Grade USP Class VI for flexible joints on rigid/flexible PVC and polycarbonate.

Epoxies

Type: 2060A
Encapsulant with very low ionics and outgassing.

Type: 2060AG
Type (AG) is a non-flowing, glob top version of 2060A.

Type: 2062A
Similar to 2060A with reduced CTE and improved moisture resistance, Particularly low in ionic imprities.

Type: 2500
Standard potting and encapsulating material. Also used to adhere and fixture.

Type: 2510
Semi rigid encapsulating material.

Type: 2511
2511 is a thixotrpic version of 2510, less flow, better for dipping and sealing.

Type: 2710
General purpose, semi-flexible foe sealing and potting. Low viscosity, easy flow and penetration.

Type: 2722
Semi-Rigid material for use on rigid substrates and metalsas well as plexiglass and polystryrene.

Type: 2722G2
Particularly effective on flame brushed polyolefins.

Type: 2728
Semi-rigin, tough material for tacking, wire bonding and gap filling.

Type: 2728SP
Low CTE version of 2728 for high temperature cycling applications.
Type: 2728HH
High heat resistant version.

Type: 2728HH/SP
Provides heat resistance and lower CTE.

Type: 2728HTG
Higher Tg version of 2728HH.

Type: 2728ETG
Provide highest heat resistance and Tg in the 2728 series.

Type: 2732
Cures toan RTV like soft consistency. For fitting, tacking, strain relief and globbing. Low stress.

Type: 2734
This is a self levelling version of 2732.

Type: 2900
Conformal coating for PCB's components + other substrates. 2900 provides a flexible, reworkable finish.

Type: 2900LV
Low viscosity version.

Type: 2900H
Has a hard finsih for best protection.

Type: 2900F
For use on flexible substrates. A fluorescent tracer can be added to any of this series.